Contact Now

  • +91-484-2356290, 484-4069903   |   +91-9526025511
  • +91-9447866903

Home Page 1

Certification Scheme for welding Inspection Personal-Level II (TWI-UK CSWIP 3.1)

Certification Scheme for welding Inspection Personal-Level II (TWI-UK CSWIP 3.1)

Suitable for inspection engineers and supervisory staff. The course is ideal for inspectors requiring preparation for the CSWIP examinations - Welding Inspector.

Those with little or no previous welding experience are advised to attend the Certificate in Visual Inspection of Welds course to prepare for this course.

Course Content

The duties and responsibilities of a welding inspector; fusion welding processes; typical weld defects; types of steel; carbon-manganese, low alloy and stainless steels; hardening of steels; weldability; heat treatment; parent metal defects; visual inspection; testing parent metals and welds; destructive tests; NDT techniques; welder and procedure approval; codes and standards; outline of safe working practices; practice in examination questions; continuous and end-of-course assessment. In addition, candidates meeting the CSWIP requirements for eligibility complete the relevant CSWIP examination on day 5.

Course Objectives

> To understand factors which influence the quality of fusion welds in steels

> To recognise characteristics of commonly used welding processes in relation to quality control

> To interpret drawing instructions and symbols to ensure that specifications are met

> To set up and report on inspection of welds, macrosections and other mechanical tests

> To assess and report on welds to acceptance levels

> To confirm that incoming material meets stipulated requirements and recognise the effects on weld quality of departure from specification

> To be in a position to pass the Welding Inspector - Level 2 examinations


> Welding Inspector for a minimum of 3 years with experience related to the duties and responsibilities listed in Clause 1.2.2 of CSWIP document WI-6-92, under qualified supervision, independently verified OR

> Certified Visual Welding Inspector (Level 1) for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1 and 1.2.2 of CSWIP document WI-6-92 OR

> Welding Instructor or Welding Foreman/Supervisor for a minimum of 5 years

Experience will need to be verified by either your previous/present employer/company.